![]() ![]() This tiny rare 10mm wide connector is used for slim optical drives. KEY FEATURES 90W Maximum Ouput 12V DC-Input 20-Pin ATX-standard connector 1 x SATA power connector 1 x PATA (Molex) power connector 1 x 4-pin 12V power. WIth 3x +3.3V orange wires or +5V red wires. (Not to be mistaken for the Auxilairy ATX connector which looks the same)Ī similar looking P10 connector can also be found on some rare AT PSUs. P8 and P9 connector MUST be plugged in so that the black wires are side by side (together in the center) Pin2 can be found empty, although the norm required a 12V yellow wire. A beveled pin is universal and fits any socket. Pin2 can be found empty, although the norm required a 12V yellow wire.Ĩ Pin connector for PCI Express graphic cards. The 8 pin is for the CPU and the 20+4 is the bulk of the other motherboard items. (Not to be mistaken for the P8 or P9 ATX connectors which look the same)Ħ Pin connector for PCI Express graphic cards. This may be a year later, but yes, you are correct in what those connectors are for. See our PSU page for older PSU with Aux ATX Connector. Replaced in 2004 by the 24pin connector, this 6pin connector is now obsolete (the extra 3.3V and 5V rails it provided are now incorporated in the 24pin connector ). Sometimes required on old boards with AMD Dual CPUs to provide more power. Most drives do not require this +3.3V wire.īy the PSU itself rather than the motherboard )Ĩ Pin EPS connector: ( Entry-level Power Supply) required on dual CPU boards. ![]() SATA adaptors connected to a Molex do not include it. Note that the orange +3.3V wire is not always present. In this case ask for a 24 to 20 pin adaptor orĤ Pin 3.5" Connector for Floppy Drive and other peripherals. Too closed to the socket and prevent the 24pin connector to be pushed all In modern desktop computer system, there are two connectors for the motherboard: a 4-pin auxiliary connector providing additional power to the CPU, and a main. This may not be possible if some motherboard components are There is only one way theĬonnector can be plugged in so there is no risk of error. The 4 unused pins (black, red, yellowĪnd orange wires) are simply left hanging. <<<< Note that an ATX PSU with 24 pin can be plugged into a ![]() This is a sensor which m onitors the voltage in the wire. Some wires, usually the orange wire at pin 13, may have a thinner brown wire attached to them. Some HP Pavilion Slimline Computers require a PSU with a Mini 24pin Checking the standard ATX connector pinout it mainly gives out 'standard' positive voltages, like +3.3VDC, +5VDC and +12VDC. Some Dell, WTX or AMD PSUs may have connectors with a different pinout. Why is -12V needed on an ATX power supply. See our PSU page for older PSUs with -5V wire. It is now missing on all 24pin connectors. The white -5Volt wire (pin 20) became obsolete with the removal of the ISA bus on modern boards. PSU Connectors & Certifications PSU Connectors ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |